Kodak Scanners i800 Series - Manual (Page 48)

A-61169 July 2003 5-5
Cleaning the vertical
transport area Follow the steps below to clean the vertical transport area:
1. Grasp the vertical transport plate and pull it down until it stops.
2. Slide the horizontal baffle plate out and vacuum inside the housing.
3. With a soft cloth, wipe the document sensors and the black strip on
the horizontal baffle plate.
IMPORTANT: When vacuuming the scanner, be careful not to scratch the
sensors.
4. Clean the document sensors.
5. Slide the horizontal baffle plate back in place.
Horizontal baffle plate
Document sensors
Black strip