Document sensor location – Kodak Scanners i800 Series User Manual
Page 78
Advertising
6-10
A-61169 July 2003
Message
Description
Message
Action
Unable to enable
Check to be sure all doors are closed. If all the doors are closed, perform a
controlled power-down sequence. If the error persists, call Service.
Message
Action
Unable to execute command
You have tried to perform a function that is not permitted in the current state of the
scanner or with invalid parameters. For example, you attempted to run the
scanner when it is not enabled; or if you attempted to run the scanner when you
have a paper jam.
Document sensor
location
The illustration below shows the location of the document sensors.
Advertising