Kenwood AMPLIFIER/TUNER R-K1000 - Manual (Page 10)

1
2
3
10 R-K1000
Main Connections
Connecting the System
To AC wall
outlet
1 Connect the lead to the [FM 75Ω] terminal.
2 Find the location that gives the best
reception.
3 Fix the antenna in place.
FM indoor antenna
Room equalizer microphone
Right speaker Left speaker
Ensure that all the cords are securely connected. Loose or incomplete connections may
result in noise interference or no sound at all.
Caution for
connection Do not plug the AC power cord into an AC wall outlet until all the connections are completed.
Before disconnecting any cords or cables, always turn the main unit off and unplug the power cord
from AC wall outlet.
AM loop antenna
Push into the
slot.
Connect this for ROOM EQ (Room
Equalizer) setup. Disconnect after
completing setup.
Connect the lead (black) to the
[ANTENNA
M] terminal.
The [ANTENNA M] terminal is
exclusively for the antenna. It is
not an earth terminal for safety
purpose.
z
For more information,
see “Connecting Other
Accessories (Commercially
Available Units)” on P.13–15.
AC power cord
Insert the plug fi rmly
all the way into the
AC wall outlet. z