Kenwood AMPLIFIER/TUNER R-K1000 - Manual (Page 67)

67 English
[Digital unit]
Sampling frequencies
.................................... 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Supreme EX (CD, D-IN1, D-IN2, D-IN3)
Playable frequencies ................................................... 1 Hz – 44 kHz
Digital input terminals (Sensitivity/Impedance/Wave length)
OPT (Optical) .................. –24 dBm – –15 dBm, 660 nm ± 30 nm
COAX (Coaxial) ............................................................. 0.5 Vp-p, 75 Ω
[Tuner]
FM tuner
Reception frequency range
............................................. 87.5 MHz – 108 MHz (50 kHz step)
AM tuner
Reception frequency range ......................... 531 kHz – 1,602 kHz
[Power Supply, etc.]
Power consumption ........................................................................... 57 W
Power consumption (Standby) ................................Less than 0.25 W
Dimensions
Width ...................................................................270 mm (10-10/16”)
Height .......................................................................99 mm (3-14/16”)
Depth..................................................................... 318 mm (12-8/16”)
Weight (net) ..................................................................... 5.3 kg (11.68 lb)
Design and specifications are subject to change without
notice.
Full performance is not guaranteed in extremely cold
environments (under water-freezing temperatures).
z
z
[Amplifi er]
Rated output
Rated output power (Clear A: OFF)
......................40 W + 40 W (63 Hz – 12.5 kHz, 0.7 %, 6 Ω, IEC)
Output power (Clear A: OFF)
...........................................50 W + 50 W RMS (1 kHz, 10 %, 6 Ω)
...........................................60 W + 60 W RMS (1 kHz, 10 %, 4 Ω)
Output power (Clear A: ON)
...........................................10 W + 10 W RMS (1 kHz, 10 %, 6 Ω)
...........................................15 W + 15 W RMS (1 kHz, 10 %, 4 Ω)
Total harmonic distortion (Clear A: ON)
.........................................................................0.08 % (1 kHz, 1 W, 6 Ω)
Frequency response (IHF ’66)
LINE (AUX, TAPE, D.AUDIO) ..........8 Hz – 30 kHz, +0 dB – –3 dB
LINE (CD, D-IN1, D-IN2, D-IN3) ....8 Hz – 30 kHz, +0 dB – –3 dB
PHONO ‘RIAA’ response .................................20 Hz – 20 kHz, ±1.0 dB
Maximum input level
PHONO (MM) ......................................50 mV, 0.1 % T.H.D. at 1 kHz
Signal to noise rario (CD, D-IN1, D-IN2, D-IN3).....120 dB (IHF ’66)
Tone control characteristics
BASS
(TURN OVER 60 Hz) .......................................±3.0 dB (at 60 Hz)
(TURN OVER 100 Hz) .................................... ±5.3 dB (at 60 Hz)
(TURN OVER 150 Hz) .................................... ±6.0 dB (at 60 Hz)
MID
(TURN OVER 1 kHz)........................................ ±6.0 dB (at 1 kHz)
(TURN OVER 2 kHz)........................................ ±6.0 dB (at 2 kHz)
(TURN OVER 3 kHz)........................................ ±6.0 dB (at 3 kHz)
TREBLE
(TURN OVER 5 kHz)......................................±5.6 dB (at 10 kHz)
(TURN OVER 7 kHz)......................................±4.9 dB (at 10 kHz)
(TURN OVER 10 kHz) ...................................±3.0 dB (at 10 kHz)
Input terminals (Sensitivity/Impedance)
PHONO (MM) ...............................................................3.5 mV / 29 kΩ
LINE (AUX, TAPE) ....................................................... 200 mV / 82 kΩ
LINE (D.AUDIO) ......................................................... 100 mV / 82 kΩ
Output terminals (Level/Impedance)
LINE (TAPE) ................................................................. 200 mV / 760 Ω
Specifi cations