Kenwood AMPLIFIER/TUNER R-K1000 - Manual (Page 52)

TIMER DISPLAY SLEEP
MODE
FLAT TONE
ENTER
TUNING
RANDOM REPEAT P.MODE
AUTO / MONO
ClearA
VOL
RC-R0830E
P.CALL
TUNER D.AUDIO CD
BAND
AUX PHONO TAPE
D-IN1 D-IN2 D-IN3
ROOM EQ
MUTE
CLEAR
DIMMER
MODE
SOUND
PRESET
52 R-K1000
Set the time. 4 4
Select “TIME ADJUST”.
Press the [ A] or [B] key.
2 2
Set the day of the week.
Press the [ A] or [B] key.
3 3
Press the [ A] or [B] key.
Set the “hour”.
Press the [ A] or [B] key.
Set the “minute”.
Press the [ENTER] key.
Press the [ENTER] key.
The set day and time are displayed.
If you make a mistake with the settings, press the [ C] or [D] key to move the
cursor and re-enter the settings.
z
z
If there is a power failure or the system is unplugged from the wall outlet for
some time, set the time again.
Pressing the [ F] key while the system is in the Standby mode will display the
time for 5 seconds.
z
z
Press the [ENTER] key.
Press the [ENTER] key.
Press the [MODE] key. 1 1
Set the system clock to the correct time. If you use the Program Timer for playback when the time is not
set correctly, you will not be able to run the program at the correct time.
Setting the Time
The “minute” fl ashes. z
The “hour” fl ashes. z