LOREX Technology L15LD400 - Manual (Page 40)

40
Configuration
TIME/DATE SETUP
The date and time set by the manufacturer may be
different from your time zone. It is very important to
configure the system date and time before starting
recording. Set the date and time by using Mouse
wheel:
• DATE FORMAT- Asia/American/European
• TIME FORMAT- 12 hours/24 hours
• MONTH FORMAT- English/Numeric
NOTE: It is strongly recommended to Set the time/
date, Reset all factory defaults and CLEAR the Hard
Drive.
PASSWORD SETUP
The password consists of 1 to 8 digits. Click the 0~9
icons (or front panel buttons) to enter the password.
Then click ENTER to confirm and enter the system.
1. USER ID - Display User ID.
2. USER PW - Enter the current password.
3. NEW PW - Enter the new password.
4. CONFIRM PW - Enter the new password again for
confirmation.
BUZZER SETUP
1. KEY TONE - Turn the system beep ON/OFF (when
buttons are pressed on the front panel or remote
control).
2. VIDEO LOSS - Turn the beep ON/OFF when a
Video Loss event is detected.
3. ALARM ACTIVE - Turn the beep ON/OFF when
an Alarm event is detected.
4. DURATION - Sets the duration for the alarm
(10~590 seconds)