LOREX Technology L15LD400 - Manual (Page 44)

44
BACKUP
RS232C SETUP
Users can connect the System to a PC through the
RS232 port. Other system control devices can also
be connected through the RS232 port. The
ASCII-Code information is in Serial port setup
(Users cannot change value in this setting).
1. BAUDRATE - The transmission baudrate is
19200bps.
2. LENGTH - The transmission length is 8 bits.
3. STOP BIT - The stop bit is 1.
4. PARITY - The parity is none.
BACKUP
USB BACKUP SUBMENU
1. HDD - Indicates the start and the end recording
date and time on the Hard Drive.
2. USB - Select a starting date and time for backup.
Use Mouse wheel to change the value, then select
the SIZE to choose a backup size.
3. SIZE - Insert the USB device, and the system will
automatically check the disk size and display the
available space onscreen. Use Mouse wheel to
change the value. The system will automatically
calculate the end date and time for backup.
4. BACK-UP - Move the cursor to BACK-UP and Click
it to begin the backup process. The System will
save the file in AJP format. Users have to install
the LorexPlayer 2.0 Backup Software to playback
the file. Please refer to the provided Software
Guide for further details.