LOREX Technology L15LD400 - Manual (Page 41)

41
EXTERNAL DEVICE
EXTERNAL DEVICE
1. TCP/IP SETUP - Configure the system Networking
information.
2. PAN/TILT SETUP - Set up the parameters of the
PTZ control.
3. SPOT SETUP - SPOT output setup.
4. RS232C SETUP - Set up the parameters of the
RS232 port.
TCP/IP SETUP - IP SETUP
1. MAC ADDRESS - Displays the MAC address.
MAC address cannot be changed and is unique to
each system.
2. DHCP MODE - Set the DHCP mode to Manual or
Automatic.
• When DHCP is set to Automatic, the settings
will be retrieved from the network router - and
settings cannot be changed manually.
• To turn off the DHCP automatic detection, set
the DHCP MODE to DISABLE.
3. IP PORT - Manually Enter an IP Port number. The
default port is 50000
4. IP ADDRESS - Manually set the IP address.
5. GATEWAY - Manually set the GATEWAY.
6. SUBNET - Manually set the SUBNET MASK.
TCP/IP SETUP - DDNS SETUP
1. DDNS ENABLE - Turns the DDNS Function ON/
OFF.
2. DNS SERVER - Enter the DNS Server’s IP
address. Use Mouse Wheel to change the value.
The default IP is 202.133.244.128