LOREX Technology L15LD400 - Manual (Page 55)

55
Hard Drive Replacement - Appendix #8
STEP 4: Secure the Hard Drive in the Casing
• Use screws and tighten them, positioning the
Hard Drive into place. This step is optional,
but it is recommended.
STEP 5: Slide the top Cover over the Cartridge Casing
• Slide the Cover forward over the Cartridge Case. Ensure
it is secured in place over the release latch.
STEP 6: Reinsert the Cartridge Casing into the DVR
• Fully insert the Cartridge Case into the DVR.
STEP 7: Lock the Cabinet
Lock the cabinet by turning the key clockwise.
Position Hard Drive and secure with
provided screws
Cover Hard Drive
positioning
Locked
Unlocked
NOTE:
If you do not lock the cabinet, the system will NOT DETECT THE HARD DRIVE and will not
function properly. Refer to the Side Panel (Removable Hard Drive Cartridge) on page
13 for
lock location.