Blocking junk faxes – Lexmark 7600 Series User Manual
Page 119
3
Press the up or down arrow button until Reports is highlighted, and then press OK.
4
Press the up or down arrow button until Print Settings List is highlighted, and then press OK.
The user default settings list prints, which lists each fax setting in the printer, the value it is set to, and its factory
default.
Blocking junk faxes
If you have Caller ID, you can block faxes sent from specific numbers and/or all faxes which do not include a Caller
ID number.
1
To turn on the Block List feature:
a
From the printer control panel, press Setup.
b
Press the up or down arrow button until Fax Setup is highlighted, and then press OK.
c
Press the up or down arrow button until Fax Blocking is highlighted, and then press OK.
d
Press the up or down arrow button until Turn On/Off is highlighted, and then press OK.
e
Press the up or down arrow button until On is highlighted, and then press OK to save the setting.
2
To add each fax number you want to block:
a
From the printer control panel, press
.
b
Press the up or down arrow button until Fax Setup is highlighted, and then press OK.
c
Press the up or down arrow button until Fax Blocking is highlighted, and then press OK.
d
Press the up or down arrow button until Add is highlighted, and then press OK.
e
Use the keypad numbers to enter the name of the person associated with the fax number in the Name field.
f
Press the arrow button once.
g
Use the keypad numbers to enter the fax number in the Fax Number field, and then press OK to save and exit.
3
To block faxes sent from an unidentified number (a number with no Caller ID):
a
From the printer control panel, press
.
b
Press the up or down arrow button until Fax Setup is highlighted, and then press OK.
c
Press the up or down arrow button until Fax Blocking is highlighted, and then press OK.
d
Press the up or down arrow button until Block No ID is highlighted, and then press OK.
e
Press the up or down arrow button until On is highlighted, and then press OK to save the setting.
4
If you want to print a list of blocked faxes:
a
From the printer control panel, press
.
b
Press the up or down arrow button until Fax Setup is highlighted, and then press OK.
c
Press the up or down arrow button until Fax Blocking is highlighted, and then press OK.
d
Press the up or down arrow button until Print is highlighted, and then press OK to print the list.
Note: This feature is available only when there are blocked fax entries.
Faxing
119