Lexmark 7600 Series - Manual (Page 54)

Printer currently set up locally (using USB connection)
1 From the Finder desktop, double-click the printer folder.
2 Double-click Lexmark Wireless Setup Assistant.
3 Follow the on-screen instructions for configuring the printer wirelessly.
Note: There is no need to remove the USB cable connecting the printer to the computer during wireless configuration.
Printer currently set up for Ethernet
1 Unplug the Ethernet cable from the printer.
2 Place the printer close to the computer you want to use to configure the printer for wireless access.
Note: You will need to connect the printer to the computer with a USB cable. Make sure the printer is close
enough to the computer for your USB cable to reach both.
3 From the Finder desktop, double-click the printer folder.
4 Double-click Lexmark Wireless Setup Assistant.
5 Follow the on-screen instructions for configuring the printer wirelessly.
Use the printer locally (USB)
Select the connection type that describes how you currently access your printer:
Printer currently set up for Ethernet
1 Attach one end of a USB cable to the USB port on the back of the printer. Attach the other end to a USB port on
the computer.
2 Add the printer (see “Add the printer” on page 55).
3 A second print queue will be created. Remove the Ethernet queue if you do not want to switch back to accessing
the printer over an Ethernet connection.
Printer currently set up for wireless
1 Attach one end of a USB cable to the USB port on the back of the printer. Attach the other end to a USB port on
the computer.
2 Add the printer (see “Add the printer” on page 55).
3 A second print queue will be created. Remove the wireless queue if you do not want to switch back to accessing
the printer over a wireless connection.
Use the printer over an Ethernet network
Select the connection type that describes how you currently access your printer:
Printer currently set up for wireless
1 Plug one end of an Ethernet cable into the printer and the other end into an available port on a switch or wall
jack.
2 Wait for a minute for the Ethernet network interface to become active and acquire an IP address from the network.
Installing the printer on a wireless network (selected models only)
54