Lexmark 7600 Series - Manual (Page 13)

Setting up the printer
Granting access to the software during installation
Third-party applications, including antivirus, security, and firewall programs may alert you about the printer software
being installed. For your printer to work properly, you must grant access to the printer software.
Setting up the printer as a copier only or fax only
Use the following instructions if you do not want to connect the printer to a computer.
Note: If you want to connect the printer to a computer, use the setup documentation and the printer software CD
that came with the printer.
1 Unpack the printer.
Notes:
• Place the printer near the computer during setup. If you're setting up on a wireless network, you may move
the printer after setup is complete.
• Contents, such as the number of print cartridges, may vary by model and region.
• Do not attach the USB cable until prompted to do so.
1
2
3
W F I I P R IN TIN G
1
2
3
4 5
6
7
8
9
1 Power cord
2 Telephone cord
3 Printer software CD
4 USB cable or installation cable
Note: Your printer model may not ship with a USB cable. Purchase a USB cable separately.
Setting up the printer
13