Lexmark 7600 Series - Manual (Page 143)

5 Press the up or down arrow button to select a lower transmission speed, and then press OK.
6 Press .
7 Resend the fax.
8 If the problem persists, repeat step 1 through step 5 to resend the fax at successively lower transmission speeds.
Note: 2400 bps is the lowest transmission speed.
Notes:
• The lower the transmission speed, the longer it will take your fax to print.
• This solution will reduce the speed for future faxes until you reset the transmission speed.
Phone Line Busy
These are possible causes and solutions. Try one or more of the following:
C
HANGE REDIAL SETTINGS
The printer automatically redials three times at 2-minute intervals. You can change the default settings to redial
up to five times at intervals up to 8 minutes.
To change the redial settings:
1 From the printer control panel, press .
2 Press the up or down arrow button until Fax Setup is highlighted, and then press OK.
3 Press the up or down arrow button until Dialing and Sending is highlighted, and then press OK.
4 To change the number of times the printer will redial:
a Press the up or down arrow button until Redial Attempts is highlighted, and then press OK.
b Press the up or down arrow button until the setting you want is highlighted, and then press OK.
5 To change the length of time between redials:
a Press the up or down arrow button until Redial Time is highlighted, and then press OK.
b Press the up or down arrow button until the setting you want is highlighted, and then press OK.
S
CHEDULE TO RESEND FAX AT A LATER TIME
See the instructions on sending a broadcast fax at a scheduled time.
Troubleshooting
143