Lexmark 7600 Series - Manual (Page 21)

Use the To
5 Automatic Document Feeder (ADF) tray Load original documents in the ADF. Recommended for
scanning, copying, or faxing multiple-page documents.
Note: Do not load postcards, photos, small items, or thin
media (such as magazine clippings) into the ADF. Place
these items on the scanner glass.
6 Automatic Document Feeder (ADF) output tray Hold documents as they exit from the ADF.
7 Automatic Document Feeder (ADF) paper guide Keep paper straight when feeding into the ADF.
Note: Adjust the paper guide on the ADF tray to the
width of the original document.
8 Printer control panel Operate the printer.
9 Paper exit tray Hold paper as it exits.
10 Memory card slots Insert a memory card.
11 Card reader light Check card reader status. The light blinks to indicate that
a memory card is being accessed.
12 PictBridge port Connect a PictBridge-enabled digital camera or a flash
drive to the printer.
13 Wi-Fi indicator
Note: Your printer model may not have wireless
capability and may not have this indicator.
Check wireless status:
• Off indicates that the printer is not turned on or that
no wireless option is installed.
• Orange
– indicates that the printer is ready to be configured
for wireless printing
– indicates that the printer is connected for USB
printing
• Orange blinking indicates that the printer is
configured but is unable to communicate with the
wireless network.
• Green indicates that the printer is connected to a
wireless network.
Setting up the printer
21