LevelOne FPS-3003 - Manual (Page 22)

22
4.4.2 Using LevelOne MFP Control Center Tool for SMB
Printing
Windows Platform: Windows 98, ME, 2000, XP and 2003
1. Start LevelOne MFP Control Center, select your MFP server and
click Add Printer.
2. Select USB1 Port or USB2 Port to add the printer in Add the
printer box, choose to use host name or IP address to
represent MFP server in Select IP Address or Host Name in
printer port box, and select the network printing protocol of
Printing with Network Path (SMB).
If your server is running on a different LAN than your
Windows PC such as wireless Windows PC, you must choose IP
address in Select IP address or Host Name in printer port
box.
3. Click Apply.
4. Select the desired printer driver and click Set Port to Printer.