LevelOne FPS-3003 - Manual (Page 28)

28
5. If you can not find any printer driver in Printer List, please
install your printer driver first or click Add New Printer to
install the printer driver.
4.4.5 Using Standard Windows Method for Raw TCP Printing
Windows Platform: Windows 2000, XP and 2003
1. Open Printers and Faxes
2. Right-click the printer for which you want to change settings,
and then click Properties
3. Clear Enable bidirectional support and click Add port, and
then click Standard TCP/IP Port from the dropdown and click
New port.
4. The "Add Standard TCP/IP Printer Port Wizard" will pop
up and click Next.
5. In the Printer Name or IP Address box, type host name of
the MFP server (default: FPS-3003) or IP address of MFP server.
In the Port Name box, type USB1_RAW or USB2_RAW for
printer connected to USB1 port and USB2 port, respectively.