LevelOne FPS-3003 - Manual (Page 37)

37
Chapter6 File Server Function
This chapter describes the file server function of FPS-3003 MFP server
which allows USB storage devices to be shared across a network by
using SMB: NetBIOS over TCP/IP and FTP protocol.
6.1 Preliminary
1. This product supports a file format of FAT12/16/32. It will not
support a drive formatted by NTFS, etc.
2. LevelOne technology is not responsible for the loss or
corruption of data in memory devices, including hard disk;
LevelOne is not responsible for the leak, manipulation, loss, or
corruption of data in memory devices connected to MFP server
after unauthorized access.
3. In order to use the USB Mass Storage device connected to the
MFP server, the SMB protocol or FTP protocol must be set up.
4. This product does not support to magnet optical drive devices
such as CD/DVD.
5. This product allows shared two USB storage devices over the
network in Windows through the USB ports.
6. This product does not support the USB devices through USB
hub.
6.2 Storage Names
The local drives of the two storages in USB1 port and USB2 port are
named as USBx_DxPx, where USBx represents the USBx port, Dx
represents the the x-th Disk and Px represents the x-th partition.
6.3 Connecting USB Mass Storage to FPS-3003
LAN HUB/Switch
Storage
FPS-3003