LevelOne FPS-3003 - Manual (Page 52)

52
SNMP: You can set community and some parameters for
SNMP server. Furthermore, you can enable SNMP v3 for more
security.
Set SNMP Configuration
Authentic Community: set Community name of SNMP
server.
Trap Community: set Trap Community name for SNMP
server to send trap packets.
Trap Address: type an IP address to send the Trap packet.
SysContact: type some letters for variable of SysContact
that represents the name of system contact.
SysName: type some letters for variable of SysName that
represents the name of system.
SysLocation: type some letters for variable of SysLocation
that represents the location of system.
EnableAuthenTrap: type 1 or 2 for the variable of
EnableAuthenTrap that represents to enable (1) or disable (2)
to send Trap packets receiving the wrong Community name.
SNMP V3
Enable SNMP V3: select or clear Enable SnmpV3 support
User Security name: set user security name of SNMP v3
Auth Password: set authentication password of SNMP v3.
Privacy Password: set privacy password of SNMP v3.