LevelOne FPS-3003 - Manual (Page 48)

48
Add Printer : perform add printer function of the highlight
list’s server
8.2.2 Display Server’s Status
You can start LevelOne MFP Control Center and select your MFP server
to see the server status which includes Host Information, TCP/IP, USB
Devices Status and Supported Protocols.
8.2.3 Set up Server’s Configuration
General Configuration
Set Host Information: You have to set some
information for networking using SMB protocol:
Comment: optionally set to describe the server
Host Name: the name to represent the server for
Windows networking using SMB protocol
Workgroup: the SMB workgroup name that the server
belongs to.
File Server Code Page: You have to select your code
page while operating network file sharing. Generally, the
criteria of choosing code page are based on your Windows
code page. For example, if your Windows code page is
Traditional Chinese, you have to select Traditional Chinese
(Big5) in server. Please refer to Chapter 6 File Server
Function.
USB Device Information: You can set printer names and
display some information of USB mass storages and scanners.
Please refer to Chapter 4, Chapter 6 and Chapter 7.
TCP/IP: You have to set the server’s TCP/IP configuration to
connect TCP/IP network. Please see Chapter 3 Basic
Installation for more details.
Supported Protocols: The server supports the following
TCP/IP protocols:
TCP/IP
Enable LPR (Line Printer Remote) Printing: select or