LevelOne FPS-3003 - Manual (Page 29)

29
If your server is running on a different LAN than your
Windows PC such as wireless Windows PC, you must type
server’s IP address in Printer Name or IP Address box.
6. Click Next.
7. Click Custom/settings.
8. The click Settings and confirm that the settings are as below.
The default Port Number values are 9100, 9101 for USB port 1
and USB port 2, respectively. Refer to server’s web pages or
LevelOne MFP Control Center tool, you can get exact values.
9. Click OK and then Finish.