Lancom Systems 3550 - Manual (Page 19)

LANCOM 3550 Wireless
࡯ Chapter 2: Installation
19
EN
ᕡ
Power This LED indicates that the device is operational. After the device has been
switched on, it will flash green for the duration of the self-test. After the self-
test, either an error is output by a flashing red light code or the device starts
and the LED remains lit green.
 The power LED flashes red/green in alternation until a configuration
password has been specified. Without a configuration password, the
configuration data of the LANCOM Wireless is insecure. Under normal
·
WLANLink
³
Power
off Device off
green blinking Self-test when powering up
green Device ready for use
red/
green blinking alternately Device insecure: configuration password not assigned
red blinking Time or connect-charge reached