Lancom Systems 3550 - Manual (Page 61)

LANCOM 3550 Wireless
࡯ Chapter 7: Security settings
61
EN
7.3 The security settings wizard
Access to the configuration of a device permits not only to read out critical
information (e.g. WEP key, Internet password). Rather, also the entire settings
of the security functions (e.g. firewall) can be altered then. So an unauthorized
configuration access endangers not only a single device, but the entire net-
work.
Your LANCOM Router has a password protection for the configuration access.
This protection is already activated during the basic configuration by entering
a password.
The device locks access to its configuration for a specified period of time after
a certain number of failed log-in attempts. Both the number of failed attempts
and the duration of the lock can be set as needed. By default, access is locked
for a period of five minutes after the fifth failed log-in attempt.
Besides these general settings you can also check the security settings of the
wireless network with the security wizard as far as your device has a WLAN
interface.
7.3.1 Wizard for LANconfig
ቢ Mark your LANCOM Router in the selection window. Select from the com-
mand bar Extras
̈
Setup Wizard.
ባ Select in the selection menu the setup wizard Control Security Settings
and confirm your choice with Next.
ቤ Enter your password in the following windows and select the allowed pro-
tocols for the configuration access from local and remote networks.
ብ In a next step parameters of the configuration lock like number of failed
log-in attempts and the duration of the lock can be adjusted.