Lancom Systems 3550 - Manual (Page 21)

LANCOM 3550 Wireless
࡯ Chapter 2: Installation
21
EN
ᕣ
LAN Link Condition of the LAN interface:
ᕤ
LAN Rx/Tx Indicating data traffic on the LAN interface:
ᕥ
WAN State Condition of connections via WAN interface:
ᕦ
WAN Link Condition of the WAN interface:
2.4 The back of the unit
The connections and switches of the base station are located on the back
panel:
off no network device connected
green network device connected; transfer rate 100 Mbps
orange network device connected; transfer rate 100 Mbps (The device cannot function as
directed, since a 10 Mbps fast connection is too slow for a 54 Mbps fast WLAN
data transmission in the LAN.)
off no data traffic
green flickering data traffic
off no connection established
green connection successfully established (via PPPoE, PPTP)
red failled connection establishing
off no device (DSL or cable modem) connected
green device connected, transfer rate 100 Mbps
orange device connected, transfer rate 10 Mbps
Reset AC 12 V Antenna Main Antenna Aux LAN 10/100 Mb WAN 10/100 Mb Hub
Node
ᕡ ᕢ ᕣ ᕤ ᕥ ᕦ ᕧ