Lancom Systems 3550 - Manual (Page 47)

LANCOM 3550 Wireless
࡯ Chapter 5: Setting up the UMTS profile
47
EN
The UMTS/GPRS profile settings are to be found in LANconfig in the configu-
ration area 'Interface' on the 'WAN' tab with the UMTS/GPRS profile button.
 The name of the network can be read from LANmonitor or, for exam-
ple, by using Telnet under /Status/External-Interface/Net-
work-List
. A manual network search can be initiated with the
commands do /Status/External-Interface/Scan-Networks
or so Setup/Interfaces/UMTS-GPRS-parameters/Scan-
Networks
.
5.3.2 Activate UMTS/GPRS profile
Operating the LANCOM devices with the UMTS/HSPDA function in varying
locations or with different UMTS/GPRS data cards may well require different
sets of settings. The relevant information for operating data cards is collected
in a UMTS/HSPDA/GPRS profile. The profile can be switched very quickly via
the interface settings for the UMTS interface.
The activation of the UMTS interface and the selection of the profile are to be
found in LANconfig in the configuration area 'Interfaces' on the 'WAN' tab
with the Interface settings button.