Lexicon Blu Ray Disc Player BD-30 - Manual (Page 32)

Lexicon
28
Disc Playback
1. Press the POWER button to
turn on the player.
2. Press the OPEN/CLOSE
(OPEN) button to eject the
disc tray.
3. Place the disc with the
label side facing up and the
recorded side facing down.
4. Press the OPEN/CLOSE
(OPEN) button again to
retract the tray.
5. The player will read the disc information and starts playback.
6. Depending on the content of the disc, a menu or navigation
screen may appear. Please use the navigation ARROW and
SELECT buttons to select the content to play.
7. To stop playback, press the STOP button.
8. To turn off the player, press the POWER button.
Note
• During DVD and some Blu-ray Disc playback, pressing the STOP
button for the first time brings the player to a pre-stop mode.
You can resume playback from the stopped point by pressing the
PLAY button. This pre-stop mode allows you to change the player
settings and then resume playback. To completely stop playback,
press the STOP button twice.
• Certain Blu-ray Discs with BD-Java technology do not support the
pre-stop mode. Pressing the STOP button during playback of such
discs will completely stop the disc. Pressing the PLAY button once
the disc is stopped will restart it from the very beginning.
• This unit consumes a tiny amount of power even when it is turned
off to STANDBY mode. If it is not to be used for a long time,
unplug it from the household AC outlet.
Pause and Frame-by-Frame
1. During playback, press the
PAUSE button to temporarily
pause the program. In this
mode, a PAUSE icon will
appear on the TV screen.
2. While a DVD or Blu-ray Disc is paused, press the REV or FWD
button to reverse or advance the video frame-by-frame.
3. Press the PLAY button to resume normal playback.
Note
If the screen saver is set to “On” or “Energy Saver” (please refer
to page 57 for details), after pausing for 3 minutes the player will
activate the screen saver.
Basic Operations
POWER OPEN
STOP PLAY
REV FWD
PLAY PAUSE