Lexicon Blu Ray Disc Player BD-30 - Manual (Page 74)

Lexicon
70
Setup Menu Options
• Total Space – To display the total space of the persistent
storage.
• Available Space – To display the currently available space
of the persistent storage. If the available space becomes
too low, some Blu-ray Discs may not play properly.
• Erase BD-Video Data – To erase the BD-Video data from
the persistent storage.
Network Setup
The “Network Setup” section of the Setup Menu system allows
you to configure the parameters for the Internet connection of the
player, test the connection and restrict BD-Live access. The menu
items in this section are:
1. IP Configuration: To determine how the player obtains its IP
address. The available options are:
• Auto (DHCP) – The player automatically obtains its
IP address information using DHCP (Dynamic Host
Configuration Protocol). This is the default setting. In most
cases, automatic IP configuration can be used.
• Manual – Manually enter the numeric IP address
information. Set the IP configuration manually only
when the router has no DHCP server functions or when
the router’s DHCP server function is disabled. For more
information on how to manually configure the Internet
connection and what values to use, please consult your
broadband router/modem instruction manuals or call your
Internet service provider.
2. IP Address: The Internet Protocol address of the player. When
“IP Configuration” is set to “Auto (DHCP)”, the value displayed
here is obtained using DHCP and cannot be changed.
3. Subnet Mask: Each IP address has an associated subnet mask.
It is used by the player to decide whether to route network
traffic through the router or directly to another device on
the same network. When “IP Configuration” is set to “Auto
(DHCP)”, the value displayed here is obtained using DHCP and
cannot be changed.
4. Gateway: The IP address of the router. It is also called “default
gateway” or “default router”. When “IP Configuration” is set
to “Auto (DHCP)”, the value displayed here is obtained using
DHCP and cannot be changed.
5. DNS 1: The IP address of the first (primary) DNS (Domain
Name System) server. DNS is the mechanism to translate
human-readable addresses (such as www.Lexicon.com) to
numeric IP addresses. When “IP Configuration” is set to “Auto
(DHCP)”, the value displayed here is obtained using DHCP and
cannot be changed.
6. DNS 2: The IP address of the second (secondary) DNS
server. When “IP Configuration” is set to “Auto (DHCP)”, the
value displayed here is obtained using DHCP and cannot be
changed.
7. BD-Live Network Access: To restrict BD-Live content access.
The available options are:
• On – BD-Live access is permitted.
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Dimmer Control
OSD Mode
Remote Control Code
HDMI CEC
Persistent Storage
Reset Factory Defaults
Firmware Information
On
Normal
Code 1
On
Setup Menu
Exit
Dim front panel display