Lexicon Blu Ray Disc Player BD-30 - Manual (Page 66)

Lexicon
62
Setup Menu Options
Recommended Audio Format Options
Depending on your specific audio/video connection method, the
audio format options of the Lexicon Blu-ray Disc Player may need
to be adjusted to match your configuration. Please refer to the
video and audio connection methods described previously in this
guide and the following audio setup guidelines.
Audio Connection Directly to TV
If the player is connected directly to the TV through HDMI (as
described in “Method 1” on page 13), through DVI and analog
L/R audio cables (as described in “Method 2” on page 14),
or through component video and analog L/R audio cables (as
described in “Method 3” on page 15), it is recommended that you
use the following audio format options:
Secondary Audio: On
HDMI Audio: LPCM
SACD Output: PCM
Coaxial Optical Output: (any – not in use)
LPCM Rate Limit: (any – not in use)
Multi-Channel Digital Audio to Receiver or
Processor through HDMI
If the player is connected to an A/V receiver or processor with
HDMI inputs for high resolution multi-channel digital audio,
you are in luck! You are now equipped to send all current audio
formats to your receiver in pure digital form. This connection
method will typically be as described in “Method 4” on page 16 of
this guide.
To get the best possible audio via HDMI, you may need to set
the following options on the player’s audio format Setup Menu,
depending on the capabilities of your HDMI-capable receiver:
• If your receiver supports HDMI v1.3 with decoding capability
for high resolution lossless audio formats such as Dolby
TrueHD and DTS-HD Master Audio, please set these audio
format options:
Secondary Audio: Off (or On if you need
secondary audio)
HDMI Audio: Bitstream
SACD Output: PCM (or DSD if the receiver
supports DSD over HDMI)
Coaxial OpticalOutput: (any – not in use)
LPCM Rate Limit: (any – not in use)
• If your receiver supports HDMI v1.1/1.2 Multi-Channel PCM
audio, but not high resolution lossless audio formats such as
Dolby TrueHD and DTS-HD Master Audio, please set these
audio format options:
Secondary Audio: Off (or On if you need
secondary audio)
HDMI Audio: LPCM
SACD Output: PCM (or DSD if the receiver
supports DSD over HDMI)
Coaxial Optical Output: (any – not in use)
LPCM Rate Limit: (any – not in use)
In this configuration you can enjoy all audio formats using the
HDMI connection.
Multi-Channel Analog Audio to Receiver or
Processor
If the player is connected to an A/V receiver through the 7.1ch or
5.1ch analog audio jacks using 8 or 6 RCA cables (as described
in “Method 5” on page 17), you can play all supported audio
formats and listen to them with your A/V receiver and surround
sound systems. The following audio format setup options are
recommended: