Lexicon Blu Ray Disc Player BD-30 - Manual (Page 46)

Lexicon
42
3. Select a track. For example, search for Track 6 of the currently
playing disc.
• Repeatedly press the GOTO button until the cursor is
placed on the Track Number position. Use the NUMBER
or ARROW buttons to enter or select Track 6 and press the
ENTER button.
00:12:33 00:08:16 1 / 8
Memory and Automatic Resume
1. The player automatically
remembers the current
position when playback is
interrupted. Operations such
as OPEN/EJECT or turning
POWER off will cause the
player to save the current
playing position.
2. The position is memorized
even after turning off the unit
or changing the disc.
3. When the next time the disc
with a memorized playing
position is played back, the
player will recognize the saved
playing position. Playback will
automatically resume from
this saved position. However, if you wish to cancel the
automatic resume and start playback from the beginning, you
may press the STOP button when prompted.
4. The player can remember playback position for up to 5 discs.
When the sixth disc is memorized, the oldest one is replaced.
Note
• Some Blu-ray Discs do not support resuming and will always play
from the beginning.
Pure Audio Mode
You can enjoy higher-quality
audio by turning off the video
processing and output. The
Pure Audio mode reduces any
potential interference between
the video and audio signals.
1. Press the PURE AUDIO button on the remote control to turn
off video and enter Pure Audio mode. Video output will be
turned off. The “PURE” icon will be illuminated on the front
panel of the player.
2. Press the PURE AUDIO button again to resume video and
cancel Pure Audio mode.
Note
• Pure Audio mode is automatically cancelled when the unit is
switched off or when playback is stopped.
• Since HDMI carries audio together with video, the HDMI
video signal cannot be completely turned off. A black screen is
transmitted instead to minimize any potential interference.
Advanced Operations
POWER OPEN
STOP PLAY
PURE
AUDIO