Linear AKR-1 - Manual (Page 16)

14
Beeper Sound Level
The keypad’s beeper can be set to low or high level.
❑ If the keypad’s beeper is too loud for the keypad’s location,
remove jumper JP1 (see Figure 9).
Locking Keypad
After the installation is complete. Lock the keypad using the keylock
(see Figure 10).
Figure 10. Locking the Keypad Case
HOOK KEYPAD
ONTO BACKPLATE
USE KEY TO
LOCK KEYPAD
217350 D IMAGE 16
REMOVE JUMPER JP1 TO
REDUCE THE BEEPER
VOLUME
Figure 9. Removing the Beeper Jumper