Linear AKR-1 - Manual (Page 17)

15
AKR-1 OPERATION
With Entry Code
❑ Users of the AKR-1 have up to 40 seconds to key in their
entry code.
❑ Up to eight seconds are allowed between each keystroke.
❑ All digits of the entry code must be entered. Example: If the
code is 0042, the user must enter “0 0 4 2”.
❑ If the wrong key is pressed, pressing the * key will reset the
keypad. The correct code can then be re-entered.
❑ After a correct code is entered, the red indicator will
turn green and the programmed relay will activate for the
programmed time.
❑ If the number of incorrect codes entered exceeds the
keypad lockout count, the yellow indicator will light,
indicating that the keypad is locked out. The lockout will
remain for one minute.
❑ After a valid code has been entered, it will be unusable until
the anti-passback time expires.
With Wireless Transmitter
❑ Activate a wireless transmitter within radio range (up to 300
feet) of the AKR-1.
❑ After a valid transmitter is decoded, the keypad will beep,
the red indicator will turn green, and the programmed relay
will activate for the programmed time.
❑ After a transmitter has been used to gain access, it will be
unusable until the anti-passback time expires.
RED LED TURNS
GREEN WHEN
ACCESS IS GRANTED
YELLOW LED WILL LIGHT
DURING KEYPAD LOCKOUT IF
TOO MANY INCORRECT CODES
ARE ENTERED
PRESS STAR KEY TO
RESET KEYPAD IF THE
WRONG KEY IS PRESSED
USERS HAVE UP TO
40 SECONDS TO ENTER
THEIR COMPLETE CODE
Figure 11. Operating the AKR-1
217350 D IMAGE 17