Lincoln Electric IM658-A - Manual (Page 43)

C-10 ACCESSORIES C-10
GUNS AND GUN ADAPTERS
The Power Feed 10 Dual wire feeder is equipped with
a factory installed K1500-2 gun connection Kit. This kit
is for guns having a Tweco™ #2-#4 connector. The
Power Feed 10 Dual has been designed to make con-
necting a variety of guns easy and inexpensive with
the K1500 series of gun connection kits. Gun trigger
and dual procedure lead connections connect to the
single 5 pin receptacle on the front of the wire drive
box.
MAGNUM 200/300/400 GUNS
The easiest and least expensive way to use Magnum
200/300/400 guns with the Power Feed 10 Dual wire
feeder is to order them with the K466-10 connector kit,
or to buy a completely assembled Magnum gun hav-
ing the K466-10 connector (such as the K471-21, -22,
and -23 dedicated Magnum 400 guns and the K497-
20 and -21 dedicated Magnum 200 guns).
MAGNUM 550 GUNS
The easiest and least expensive way to use the
Magnum 550 guns with Power Feed 10 Dual wire
feeders is to order the gun with the K613-2 connector
kit, and install a K1500-3 gun connection kit to the
wire feeder.
LINCOLN INNERSHIELD AND SUB ARC
GUNS
All of these guns can be connected to the Power Feed
by using the K1500-1 Adapter Kit.
LINCOLN FUME EXTRACTION GUNS
The K556 (250XA) and K566 (400XA) guns require
that a K489-7 Fast-Mate™ adapter kit be installed.
The K206, K289, and K309 require only the installa-
tion of a K1500-1 connector in the Power Feed wire
feeder.
NON-LINCOLN GUNS
Most competitive guns can be connected to the Power
Feed by using one of the K1500 series adapter kits.
GUN RECEIVER BUSHINGS AND
ADAPTERS
K489-7 (DUAL SCHEDULE FAST-MATE
ADAPTER)
This adapter installs directly into the wire drive feed
plate, to provide for use of guns with Fast-Mate or
European style gun connections. This K489-7 will
handle both standard Fast-Mate and Dual Schedule
Fast-Mate guns.
K1500-1 (LINCOLN INNERSHIELD GUN
STANDARD CONNECTION)
Use this kit to connect the following guns: Guns hav-
ing a Lincoln standard innershield gun connector,
Magnum 200/300/400 with K466-1 connector kit, and
Magnum 550 guns with the K613-1 gun connection
kit.
K1500-2 (TWECO #2-#4 TYPE CONNEC-
TION)
The K1500-2 gun adapter comes factory installed on
the Power Feed 10 Dual wire feeder. Use this
adapter for guns that have a Tweco #2-#4 connector.
Such guns include Magnum 200/300/400 guns with
K466-2 connector kit, and completely factory assem-
bled Magnum guns that are factory equipped with the
K466-2 connector (such as the K471-21, -22, and -23
dedicated Magnum 400 guns and the K497-20 and -
21 Magnum 200 guns).
K1500-3 (TWECO #5 CONNECTION)
For Magnum 550 gun with K613-2 Connection Kit,
and any other gun having a Tweco #5 connector .
K1500-4 (MILLER CONNECTION)
For any gun having a newer style Miller connector.
Install gun adapters per the instructions shipped with
it.
K1500-5 (OXO CONNECTION)
For any gun having an OXO style connector. Install
gun adapters per the instructions shipped with it.
POWER FEED 10 DUAL