Lifescan Pocket Scan Blood Glucose Monitor System - Manual (Page 24)

How to do a check strip test:
Step 1: Press the On/Off Button.
Insert Side 1 of the Check Strip.
The code number will appear on the
display. When insert code 10
(Example) strip appears, slide the
notched end of the check strip into
the test strip
holder with
Side 1 (purple
side) facing up.
wait please
appears for a
moment.
Step 2: When apply sample
Appears, Remove the Check Strip
from the Test Strip Holder.
Note: Do not
apply control
solution to
the check
strip.
Note: This is the only time you
should remove a test strip during
a test.
17
BEFORE TESTING