Lifescan Pocket Scan Blood Glucose Monitor System - Manual (Page 26)

If these messages appear, repeat the
check strip test. If these messages
appear again, clean your meter and
repeat the test. If you do not obtain an
acceptable A ok check strip reading,
redo A will appear each time you turn
on your meter, indicating that your last
check strip test result was outside of
the check strip range printed on the
back of your meter. This message will
continue to appear until you perform a
check strip test that falls within the
correct check strip range.
To clean and maintain the check strip:
■
Make sure both sides of the check
strip are clean. If necessary, wipe
the check strip with a soft cloth or
tissue dampened with water. Dry it
completely.
CAUTION: If your check strip test
result is out of range, your meter
may not be working properly. Do
not use the meter to test your
blood until you get a check strip
reading that is within the correct
range printed on the back of the
meter. For assistance, call
LifeScan Customer Services at
1 800 227-8862.
19
BEFORE TESTING
(Example)