LevelOne FPS-3002USB - Manual (Page 77)

Level One Printer Servers
Example:
Marketing|RP1_PS123456:\
[T
AB ] :lp=:\
[T AB ] :rm=PS_Rm203:\
[T AB ] :rp=L1:\
[T AB ] :sd=/usr/spool/Marketing:\
[T AB ] :mx#0:
Repeat this process for each Logical Printer/Print Queue combination that you wish to create.
Printing using LPD
For LPD printing instructions, refer to your UNIX manual. The following example is for a
BSD system:
lpr -P printer_name filename
Where:
printer_name is the name of the Print Queue defined on the Unix host.
filename is the name of the file you wish to print.
Example:
lpr -P Marketing /etc/hosts
In the above example, the /etc/hosts file is sent to the printer queue Marketing. It will then be
sent to the logical printer associated with this queue.
- 74 -