LevelOne FPS-3002USB - Manual (Page 87)

Level One Printer Servers
"Printer" Button
1. After selecting the Printer button on the screen above, the NetWare printer objects ( 1
for each port on the LevelOne Printer Server) will be created if they do not yet exist.
2. The next screen (shown below) allows you to select the desired port on the LevelOne
Printer Server. This also selects the printer object. You can NOT change the printer
object associated with the port.
Figure 56: Select Printer Port (Bindery)
3. After selecting the desired port, you will see a screen like the following example,
which allows you to assign printer queues to the printer object.
- 84 -