LevelOne FPS-3002USB - Manual (Page 95)

Level One Printer Servers
The current Queue and Context are displayed at the top of the screen.
• Use the Change Context button to change the current context. The Available Operators
list on the right will then change to show the queues available in that context.
• Assign an operator by selecting them on the right, and clicking the “<<” button.
• Remove an assignment by selecting the operator from the list on the left, and clicking
the “>>” button.
Password (NDS)
Clicking the Password button on the screen shown in Figure 63: NetWare Configuration
(NDS PS mode)allows you to simultaneously change the NetWare password for the Master
File Server, and the NetWare login password stored in the LevelOne Printer Server. (The
LevelOne Printer Server must be able to login to the NetWare server.)
You will see a screen like the example below.
Figure 68: NetWare Password (NDS PS Mode)
• Enter the old (NetWare) password, and enter the new password in both fields provided.
• If the printer object has been created by BiAdmin, the Old Password will be blank. In
that case, leave this field empty.
• The new password will be saved both on the NetWare server and the LevelOne Printer
Server.
- 92 -