LevelOne FPS-3002USB - Manual (Page 90)

NetWare
Password
Clicking the Password button on the screen shown in Figure 55: Configure NetWare Server
(Bindery PS mode), allows you to simultaneously change the NetWare password for the
Master File Server, and the NetWare login password stored in the LevelOne Printer Server.
(The LevelOne Printer Server must be able to login to the NetWare server.)
You will see a screen like the example below.
Figure 60: NetWare Password (Bindery PS Mode)
• Enter the old (NetWare) password, and enter the new password in both fields provided.
• If the printer object has been created by BiAdmin, the Old Password will be blank. In
that case, leave this field empty.
• The new password will be saved both on the NetWare server and the LevelOne Printer
Server.
- 87 -