LevelOne FPS-3002USB - Manual (Page 25)

Level One Printer Servers
Windows with Server-based Print Queues
With a Server-based Print Queue, the LevelOne Printer Server is installed on an existing
Network Server (Windows, Unix, or NetWare), rather than on your PC. If your Network
Administrator uses this system, each Windows client must be set up as follows:
1. Open your Printers folder, and start the Add Printer Wizard.
2. When prompted, select Network Printer.
3. When prompted for Network Path or Queue Name:
• On Windows 98/ME, click the Browse button
• On Windows 2000/XP, leave the field blank and click Next
Figure 19: Network Path - Windows 98/ME
Figure 20: Network Path - Windows XP
4. Browse the network, and locate the Server and Printer (or Print Queue) which your
Network Administrator advised you to use.
5. Click OK, then Next.
6. Select the correct printer Manufacturer and Model, as advised by your Network
Administrator, and click Next.
7. Follow the prompts to complete the Wizard.
The new printer will be listed with any other installed printers, and may be selected when
printing from any Windows application.
- 22 -