LevelOne FPS-3002USB - Manual (Page 28)

5
Chapter 5
BiAdmin Management Utility
This chapter describes the installation and operation of the BiAdmin
Configuration & Management program.
Requirements
This program requires:
• Windows 95, Windows 98 or ME
• Windows NT 4.0, Windows 2000 or XP
Additional Recommendations:
• Screen resolution of 800 * 600 or greater.
Installation
Use the supplied CD-ROM. This CD-ROM will usually auto-run. If auto-run is disabled on
your PC, run the SETUP.exe program in the root folder.
• Select Installation and this will give you the options for BiAdmin installation
• BiAdmin is always installed if the Administrator option is chosen.
• If using the Custom option on the CD-ROM, select BiAdmin.
Operation
• Start the program by using the icon created by the setup program.
• When run, the program searches the network for all active LevelOne Printer Servers, then
lists them on screen, as shown by the example screen below.
Main Screen
Figure 23: BiAdmin Main Screen
- 25 -