LevelOne FPS-3002USB - Manual (Page 40)

Web based Management
Connecting to the LevelOne Printer Server
1. Start your Web Browser.
2. In the Address box, enter HTTP:// followed by the IP Address of the LevelOne Printer
Server.
e.g.
http://192.168.0.21
3. You will then be prompted for the password. If no password has been set, just press E NTER .
4. Use the menu bar on the top of the screen to move about. Remember to save each screen
before changing to a different screen.
Configuration Screens
Depending on your models, the Web-based interface may look different to the images shown in
the User's Manual.
The functions have not changed, and the description of each setting is correct. Only the
appearances are different.
AppleTalk
Figure 30: AppleTalk Screen
AppleTalk zone This determines which Apple systems can gain access to this printer.
Printer Object
Type These are text fields, used to describe the printer driver used for
each port. The LevelOne Printer Server is designed to work with
LaserWriter (or 100% compatible) printers.
Communication
Protocol Sets whether the port uses ASCII or Binary Communication
Protocol.. The default is Binary.
- 37 -