LevelOne FPS-3002USB - Manual (Page 71)

Level One Printer Servers
Windows 2000/2003 Server
1. Start the Add Printer Wizard, select Network Printer, then click Next to browse for the
LevelOne Printer Server.
2. Locate and double-click the LevelOne Printer Server, select the desired port, and click
Next.
A message like the following will be displayed:
Figure 43: Windows 2000 Message
Figure 44: Windows2003 Message
3. Click "OK", and select the correct Manufacturer and Model for this printer.
4. Follow the prompts to complete the installation.
5. In the Printers folder, right-click the new printer, and select Sharing.
• Select "Shared As:" and enter an appropriate name for this printer. Users will see this
name when browsing for the printer during installation.
• If desired, click "Additional Drivers" and install printer drivers for other versions of
Windows, such as Windows 98. This will assist users during the installation process.
6. Click OK to close this Window. Configuration is now complete.
Client PCs can now be configured as described in Chapter 4 - Client Configuration.
- 68 -