LevelOne FPS-3002USB - Manual (Page 81)

Level One Printer Servers
NetWare 3 and 4
The FPS-3001TXU LevelOne Printer Server supports the NetWare network protocol,
allowing you to use the NetWare "Print Server" and "Remote Printer" modes.
Configuration must be performed using BiAdmin.
In BiAdmin, select the NetWare tab to view a screen like the example below.
Figure 48: NetWare Screen
Operation Mode
• Print Server - Select this to use NetWare's Print Server mode.
• Remote Printer - Select this if the Netprint Print Server is to act as a NetWare Remote
Printer.
Frame Type
Any frame types not used on your LAN may be disabled.
Click Configure to continue. You will then see either the Print Server screen or the
Remote Printer screen, depending on the option selected.
- 78 -