LevelOne FPS-3002USB - Manual (Page 83)

Level One Printer Servers
Using BiAdmin with Client 32
With NetWare Client 32 installed on your PC, BiAdmin’s NetWare capabilities are
enhanced. As well as configuring the LevelOne Printer Server, you can configure the
NetWare Server or Servers.
Preparation
1. Ensure that you are logged into the NetWare server(s) you wish to use. You need to
have ADMIN rights so you have permission to create printer objects and queues.
2. Start BiAdmin.
3. Select a LevelOne Printer Server from the list.
4. Click the Configure Icon
5. Select the NetWare tab. (If the NetWare tab is not available, the selected LevelOne
Printer Server does not support the NetWare protocol.)
6. From the resulting screen, shown below, select the operating mode to match your
NetWare server, and click Configure. The following sections describe the screens for
each of these selections.
Figure 51: NetWare Mode
- 80 -