Configuration menu overview 48 – Lennox Hearth PAGEPRO 4650EN User Manual
Page 58
Configuration Menu Overview
48
FIN-
ISHING
Settings
SUB TRAY/MAIN TRAY/OFFSET
When
SUB TRAY
is selected, the paper is fed to the sub output
tray.
When
MAIN TRAY
is selected, the paper is fed to the main out-
put tray.
When
OFFSET
is selected, the paper is fed to the sub output tray
with each copy slightly shifted.
The setting specified in the printer driver will override this menu
setting.
"
The paper size available for
SUB TRAY
or
OFFSET
is as
follows:
Width:
89
to
216 mm
(
3.5
to
8.5 inches
)
Length:
140
to
356 mm
(
5.5
to
14.0 inches
)
"
OFFSET
can be set only when
COLLATE
is
ON
.
JOB
SEPA-
RATION
Settings
ON/OFF
The paper is fed to the sub output tray with each print job slightly
shifted.
"
If
FINISHING
is set to
MAIN TRAY
, the print jobs are fed
out stacked on the top of each other without being shifted.