Line 6 POD Farm UX1 - Manual (Page 14)

Line 6 POD Farm 1.01 – Start Here
1•11
Then press the “Go” button and the correct installer will be displayed for your system so that you can
download it to your computer. Once the download of the installer file completes, run the installer file
following its step-by-step instructions.
Windows ® XP ® and Vista ® users... When you see the Choose Hardware Type screen during the
POD Farm installation, be sure to check the box for “POD Farm iLok”, as shown here:
If you are also going to be using any Line 6 USB audio device (POD Studio, TonePort, POD X3,
PODxt or GuitarPort) then you’ll want to check the “POD Farm for Line 6 Devices” box as well.
Mac ® Users... The POD Farm installer’s default settings will install the necessary files for your
iLok, as well as the audio drivers for any Line 6 USB audio devices automatically. If desired, you
can uncheck any individual POD Farm Plug-In formats and/or Line 6 Device Drivers that you may
not need. But you will need to install at least one POD Farm Plug-In format supported by your host
audio software so that you will be able to use POD Farm Plug-In with your iLok:
For further assistance with POD Farm installation, check out the Installer Guide document available
at POD Farm Online Help . With the above steps completed, you’ll be able to access and utilize POD
Farm Plug-In in your host audio software! You are, of course, free to use any audio type of audio
interface with your DAW configuration. Please see the POD Farm Plug-In chapter for more info.
Note that POD Farm cannot be run in Standalone Operation with the iLok alone, since this requires the
use of a Line 6 POD Studio, TonePort or GuitarPort USB audio interface.