Line 6 POD Farm UX1 User Manual
Page 55
POD Farm 1.01 – Driver Panel & Recording
3•9
via ToneDirect™ monitoring for Inputs 1 & 2 of the UX8, which includes two high-Z Instrument
inputs, two XLR inputs, two Line level inputs and stereo S/PDIF input. POD Farm’s ToneDirect™
Monitoring is ideally suited for recording guitar and bass with amp and effects processing, providing
the instantaneous feel necessary for competent performance while tracking.
ASIO Record Sends
This box displays the ASIO names of the UX8’s input sources as they appear in recording applications
utilizing the UX8’s ASIO driver, along with a description of what each Send is carrying. UX8’s Input
Sources 1 through 8 are mapped directly to the corresponding Send number (i.e. - Inputs 1-2 are fed
to Record Send 1-2). Sends 9-10 and 11-12 will carry a different signal depending on if the POD Farm
Standalone application is running...
If the POD Farm Standalone application is not currently running, then you’ll see the list appear as
follows:
When POD Farm Standalone is not running, Sends
9-10 and 11-12 carry the Input 1 (dry, unprocessed)
signal
If the POD Farm Standalone application is currently running, then Sends 9-10 and 11-12 will carry
the type of signal defined within POD Farm’s Mixer view - Record Send Source menus (Processed,
Semi-Processed or Dry) - see the
section for details.
Hardware Meters Show
Use this menu to select the input and output
levels you want the UX8’s hardware meters to
display.
Clock Source
Set your preferred UX8 clock source with this menu.
Select S/PDIF to sync the UX8 to S/PDIF clock source
from another device’s digital output.