Line 6 POD Farm UX1 - Manual (Page 46)

POD Farm 1.01 – Using Your Line 6 Hardware
2•32
GuitarPort users...
Connect a 1/8-inch stereo cord to
the Headphone Out, or use the
Stereo RCA Line outputs with an
adapter.
Connect the other end to the Line
Input of your sound card.
POD Studio & TonePort users...
Connect the mono 1/4-inch
Analog Outputs (if you have a
UX8 then you probably want to use
Outs 1 &2). Or, connect a 1/4-inch
stereo cord to the Headphone Out
Use an adapter if needed to connect
to the Line Input of your sound
card.
POD X3 & PODxt users
Connect the mono 1/4-
inch Analog Left & Right
Outputs. Or, connect a
1/4-inch stereo cord to the
Headphone Out
Use an adapter if needed to
connect to the Line Input of
your sound card.