Pod x3 live, Pod x3 live •16 – Line 6 POD Farm UX1 User Manual

Page 30

Advertising
background image

POD Farm 1.01 – Using Your Line 6 Hardware

2•16

cable to your computer to use it with POD Farm Plug-In, and/or to use POD X3 as your computer’s

sound card device.

S/PDIF Digital Output - To send output from POD X3 to another device digitally, connect from this

S/PDIF Dig Out to the S/PDIF in on your other device. Connecting digitally is the best choice for

routing to external digital recording devices, such as a DAT recorder or MiniDisc. The S/PDIF output

sends out the Tone(s) according to your device settings - these options are found on the POD X3

device itself by pressing the “Outputs” button. The digital signal is always sent at 24-bit resolution.

POD X3 Live

Guitar in - Connect

your guitar or bass

Variax In - Connect your

Variax Guitar here

CD/MP3 In - Connect

an audio player

Left & Right Live Outs

Connect to your powered

speakers or mixer

USB 2.0 - Connect

to your computer

S/PDIF Out - Connect

to other S/PDIF devices

Phones - Connect your

stereo Headphones

Left & Right Direct Outs

Use as a D.I. for recording or

to the house mixer/P.A.

Mic In & Trim - Connect

a Mic & adjust trim level

Aux In - Connect a 2nd

instrument

Guitar In – Connect your guitar or bass here using a standard 1/4-inch TS instrument cable. POD X3

itself contains the processing power that turns your naked input signal into that roaring guitar Tone,

which is then fed to the “Direct/Studio Mix”, out the Analog Left & Right Outputs, as well as fed to

the S/PDIF digital output, and out the Record Sends digitally to your computer across the USB 2.0

connection. POD X3 is of course also capable of applying two Tones on your Input 1 - just dial up one

of the tone presets in the “Blends” folder of POD X3 and you’ll have two complete Tones applied to

your Input 1 signal! Or, go the POD X3’s Inputs screen to choose what you want Tone 1 and Tone 2

applied to.

CD/MP3 Input – Connect a CD player, MP3 player, drum machine or other audio device into this

stereo 1/8-inch jack and you’ll hear it at POD X3 Live’s Phones, Direct Out, and Live Out so you can

jam along. Note that the audio coming into this input is not routed to the Record Sends, so it won’t

be recorded.

Phones - If you want to listen to the audio using stereo headphones, then plug them into this 1/4-inch

stereo jack. This Headphone jack outputs the same signal fed to the Analog Line Outs; the audio from

your audio software on the computer, as well as anything plugged into the Guitar, Mic, Aux, Variax or

CD/MP3 inputs.

Advertising
This manual is related to the following products: