Lopi Leyden 028-S-75-2 - Manual (Page 35)

Maintaining Your Appliance 35
© Travis Industries 100-01177 4060802
Firebox Parts
4
2
1
1
7
9
10
6
3
5
8
11
Apply penetrating oil (WD40) to the bolts
prior to removal to prevent stripping.
This nut is located on
the exterior of the stove
beneath the rear heat
shield.
12
ID # Description Qty Part # ID # Description Qty Part #
1 Side Brick 2 2 Combustion Brick 1
3 Gasket 1 4 Back Brick 1
5 Firebox Back 1 6 Combustor with Gasket 1
7 Side Brick Clip 2 8 Back Brick Clip 1
9 Screw 4 10 Screw 3
11 Screw 4 12 Push Plugs 2
Brick Removal & Replacement
Do not pry brick - they chip and crack easily. Remove the clips holding the side brick in place.
Remove the side brick. Remove the clip holding the back brick in place. Lift the back brick up and
remove. Remove the gasket on top of the combustion brick. Remove the combustion brick.
Combustor Removal & Replacement
Remove the bricks first. Remove the four (4) screws holding the firebox back in place. Remove the
firebox back. Slide the combustor forward, taking care not to damage this component.