Operation, Function of controls, 12 room air conditioner operation – LG HB8004R User Manual

Page 12: Remote control display

Advertising
background image

12 Room Air Conditioner

Operation

Operation

• Designed for COOLING ONLY.

• Powerful and quiet cooling.

• Top-down chassis for the simple instal-

lation and service.

• Low air-intake, top cooled-air discharge.

• Built-in adjustable Thermistor
• Washable one-touch filter
• Compact size
• Equipped with reliable and efficient rotary

compressor.

REMOTE CONTROL

DISPLAY

'

F

TIMER

POWER

MODE

TEMP

FAN

SPEED

F1 LOW
F2 MED
F3 HIGH

Dry

Timer

Fan

Energy

Saver

Cool

Power

Temp

Fan Speed

Timer

Mode

1

2

3

4

5

1

2

6

3

4

5

PRECAUTION: The Remote Control unit will not
function properly if strong light strikes the sensor window
of the air conditioner or if there are obstacles between the
Remote Control unit and the air conditioner.

POWER BUTTON

To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.

This button takes priority over any other buttons.

ROOM TEMPERATURE SETTING BUTTON

This button can automatically control the temperature of the room. The temperature can be set within a range of 60°F to

86°F by 1°F. (16°C to 30°C by 1°C)

Select the lower number for lower temperature of the room.

OPERATION MODE SELECTION BUTTON

Every time you push this button, it will shift among COOL, ENERGY SAVER, FAN and DRY.
- Energy Saver: If Energy Save mode is selected, the fan stops when the compressor stops cooling.a

Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.

FAN SPEED SELECTOR

Every time you push this button, it is set as follows.

(Hi [F3] ➔ Low [F1] ➔ Med [F2] ➔ Hi [F3] ➔ Low [F1] ➔...)

ON/OFF TIMER BUTTON

You can set the time when the unit will turn on or turn off automatically by pressing the timer button. If the unit is operating,

this button controls the time it will be turned off. If the unit is off state, this button controls the time it will start. Every time

you push this button, the remaining time will be set as follows.

- Stopping operation

(1Hour ➔ 2Hours ➔ 3Hours ➔ 4Hours ➔ 5Hours ➔ 6Hours ➔ 7Hours ➔ 8Hours ➔ 9Hours ➔ 10Hours ➔ 11Hours ➔

12Hours ➔ 0Hour ➔ 1Hour ➔ 2Hours ➔... )

- Starting operation

(1Hour ➔ 2Hours ➔ 3Hours ➔ 4Hours ➔ 5Hours ➔ 6Hours ➔ 7Hours ➔ 8Hours ➔ 9Hours ➔ 10Hours ➔ 11Hours ➔

12Hours ➔ off ➔ 1Hour ➔ 2Hours ➔ ... )

REMOCON SIGNAL RECEIVER

Function of Controls

Advertising
This manual is related to the following products: